Can the school logo be printed on the cards?
We can print your school’s logo on the reverse of the cards if you upload it as an
image file when you register your details.
We can accept your logo as an image file
in one of the following formats: JPG, JPEG, TIFF, TIF, PNG, BMP or EPS. If your logo
is currently saved in a different format, open it in your image manipulation program,
select “Save As”, and then select one of the above format types in the drop-
We need to crop Logos down to the
right size and we cannot crop a logo that is a small image on a large document. To
crop your image, either cut and paste it on to the correct document size, or use
a cropping tool. Most image manipulation programs will have a cropping tool.
The image
you send us needs to be of a high enough quality to print well without looking pixelated
or “blocky”. Open your image up in any image manipulation program and check the image
size.
As a guideline, try to ensure a usable image size as follows:
- If your image manipulation program tells you the image size in terms of numbers of pixels, ensure that the image dimensions are set to at least 600 pixels by 600 pixels.
- If your image manipulation program tells you the image size in terms of its size when printed, ensure that the resolution is set to 300dpi (dots per inch), and that the printed image size is at least 50mm by 50mm.
- If your image manipulation program tells you the image size in terms of a number of kilobytes (KB), ensure that the file is at least 200 KB in size.
If you are not sure, try printing your logo onto paper. If it comes out at least
50mm tall and 50mm wide, and the image quality appears acceptable, then the image
should be ok for reproduction
We are able to accept the following but at an additional
cost to cover the additional preparation time required:
- Word documents additional cost £5.00
- Printed copies of your logo -
additional cost £8.50
Please DO NOT send logos in GIF format as these result in very low quality images.
